> Products>Carlo Gavazzi>Controls>Building Automation

Manufacturers


Notice: Undefined index: debug in /home/sclsystem/public_html/cache/smarty/compile/fc/b6/55/fcb6553ca490786cc4cad67dd2cf5ad53a945277.file.category.tpl.php on line 39

Building Automation There are 87 products.

per page
Showing 49 - 60 of 87 items
  • Quick view

    The BSH-LUX-U is a luxmeter sensor for indoor and outdoor installation which transmits the light level to the smart-house controller. It is part of the smart-house concept and it can be used in all the functions where a light level is needed. GET A QUOTE

  • Quick view

    The BSI-TEMANA-U is a temperature sensor for indoor and outdoor applications. It is part of the smarthouse concept and it can be used in the functions supported by the smart-house controller where a temperature value is needed. The environmental data read from the smart-house sensor (temperature and humidity) are logged into the SH2WEB24. GET A QUOTE

  • Quick view

    BSN-ANE-U is a cup anemometer designed for measuring air speed. It is equipped with a specially designed protection mechanism, which protects the bearings and the electronic parts against dirt and humidity. This anemometer is part of the smart-house concept for building automation applications and can be used to control roller blinds, shutters, curtains...

  • Quick view

    The SHOWEAGPS Weather Station measures temperature, wind speed and brightness (eastern, southern and western sun) and recognizes precipitation. The direction of the sun (azimuth) as well as its height (elevation) are calculated and indicated, too. Data are usually output after a request made by the Modbus master via a 2-wire RS485 connection. GET A QUOTE

  • Quick view

    The SHSUXXXX line are bus-powered room sensors for wall-mounting. They are available in different combinations of CO2, temperature and relative humidity. The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller...

  • Quick view

    The SHSUXXXXD line are bus-powered room sensors for wall-mounting. They are available in different combinations of CO2, temperature and relative humidity. The sensors have a LCD display for showing the measured values. By activating the touch button in the front the LED backlight is turned on and the signal type to be shown can be changed. The only...

  • Quick view

    The SHSUXXXXL line are bus-powered room sensors for wall-mounting. They are available in different combinations of CO2, temperature and relative humidity. The sensors have a “traffic light” LED which is used to indicate the CO2 level in green, amber or red colour. The only connection needed for the sensor is the Dupline® 2-wire cable....

  • Quick view

    The SBBADT8CCT is a DALI driver for standard and tunable white LEDs. It controls warm white and cool white output via a single DALI address, providing high power factor and efficiency. The output current is programmed by means of dip-switches, while the address can be assigned either by a DALI master or manually by means of the push-button. It can be...

  • Quick view

    This is a 200W wireless universal dimmer with energy reading to fit into eurobox. Single phase variables: A, V, W, Wdmd. Energy measurement: total kWh consumed by the connected load. This universal dimmer is suitable for dimming resistive, inductive and capacitive loads and LED lamps (see LED lamps table). The maximum load of R, L, C type is 200W...

  • Quick view

    This 1 to 10 V universal dimmer is designed for DIN-rail mounting and is 2 DIN wide. It has 4 independent outputs which, according to the defined dim percentage, give a relevant output from 1 to 10 V. It is suitable for dimming adjustable ballasts with 1 to 10 V analogue inputs. To ensure the switching function to the electronic ballast, the SH2D10V424...

  • Quick view

    This 500W universal dimmer is designed for DIN-rail mounting with energy measurement. Single phase variables: Vln, A, W. Energy measurement: total kWh consumed by the connected load. This universal dimmer is suitable for dimming resistive, inductive and capacitive loads and LED lamps. The maximum load of R, L, C type is 500W depending on the temperature:...

  • Quick view

    This 500W universal dimmer is designed for DIN-rail mounting. This universal dimmer is suitable for dimming resistive, inductive and capacitive loads and LED lamps. The maximum load of R, L, C type is 500W depending on the temperature: the reduction is described according to the trend in the diagram “derating curve”. The dimmer automatically...

Showing 49 - 60 of 87 items