View larger
Smart Dupline Wireless Dimmer with Energy Reading
This is a 200W wireless universal dimmer with energy reading to fit into eurobox. Single phase variables: A, V, W, Wdmd. Energy measurement: total kWh consumed by the connected load.
This universal dimmer is suitable for dimming resistive, inductive and capacitive loads and LED lamps (see LED lamps table). The maximum load of R, L, C type is 200W depending on the temperature: the reduction is described according to the trend in the diagram “derating curve”.
The dimmer automatically detects if the connected load is resistive, capacitive or inductive, but if a LED lamp is to be driven, the user has to select the right curve as described below. The dimmer is completely programmable via the Sx tool.
The technology used enables to electrically protect the dimmer against short circuit, overload and over-temperature. The SHJWD200WExLS230 version integrates two programmable capacitive push-buttons (K1, K2) and can be mounted into the BTicino frames Luna, Light, Living to substitutes traditional switches.
Features
• Universal wireless dimmer up to 200 W for R, L, C load and LED lamps
• Wireless transmission based on IEE802.15.4 @ 2.4 GHz
• Automatic load detection for L, R, C loads
• 1 dimmable output
• Soft start/stop
• Protected against short circuit, overload and high temperature
• Minimum load 3 W
• Programmable routing function
• Spring terminals
• Energy measurement: kWh
• Instantaneous variables readout: A, V, W, Wdmd
Type Selection
| Light Switch | Colour | Supply: 220...240 V ±10% | Supply: 110...120 V ±10% |
| Grey | SHJWD200WE230 | SHJWD200WE115 | |
| 2, programmable (K1, K2) | White | SHJWD200WEWLS230 | |
| 2, programmable (K1, K2) | Black | SHJWD200WEBLS230 |
