> Products>Carlo Gavazzi>Sensors>Conductive Level Sensors

Manufacturers


Notice: Undefined index: debug in /home/sclsystem/public_html/cache/smarty/compile/fc/b6/55/fcb6553ca490786cc4cad67dd2cf5ad53a945277.file.category.tpl.php on line 39

Conductive Level Sensors There are 17 products.

per page
Showing 1 - 12 of 17 items
  • Quick view

    The sensors VH1 are hanging electrodes with Neoprene cables.  Dimensions: Ø 18 x 36,5 mm Material: Nylon 6 Connection: Cable (Neoprene), 5 m, 1 x 2.5 mm2 Operating Temperature: 0 to +90°C (+32° to +194°F) Degree of Protection: IP 67 CE Marking: IEC 529 GET A QUOTE

  • Quick view

    The sensors VH2 are hanging electrodes with Neoprene cables.  Electrode Isolation: Yes Dimensions: Ø 32 x 75,5 mm Material: Nylon 6 Connection: Cable (Neoprene), 5 m, 1 x 2.5 mm2 Operating Temperature: 0 to +90°C (+32° to +194°F) Degree of Protection: IP 67 CE Marking: IEC 529 GET A QUOTE

  • Quick view

    The sensor A94-10 is a hanging probe for (swimming) pool level control. Material: Polyester Dimensions: Ø 22 x 75,0 mm Connection: Cable (PVC), 5 m, 2 x 0.5 mm2 Operating Temperature: 0 to +60°C (+32° to +140°F) Degree of Protection: IP 67 CE Marking: IEC 529 GET A QUOTE

  • Quick view

    VH3 is a level hanging probe specifically designed to be used in swimming pools and resists high chlorine and high salinity sea water. It is also suitable to be used in wells, reservoirs and tanks. GET A QUOTE

  • Quick view

    VH4 is a simple and easy to install level probe for general use. GET A QUOTE

  • Quick view

    VH3-4-MB1 Snap-on brackets for easy and secure installation. For use with the level amplifier CLD/CLP series. GET A QUOTE

  • Quick view

    VN Series Level sensor for measuring the level of conductive liquids, i.e. max./min. control of charging or discharging. The function is determined by the amplifier relay used. The sensors are delivered with standard length electrodes - these are cut off to suit the application. GET A QUOTE

  • Quick view

    VNY Series Level sensor for measuring the level of conductive liquids, i.e. max./min. control of charging or discharging. The function is determined by the amplifier relay used. The sensors are delivered with standard length electrodes - these are cut off to suit the application. GET A QUOTE

  • Quick view

    VPC/VPP Series Level sensor for measuring the level of conductive liquids, i.e. max./min. control of charging or discharging. The function is determined by the amplifier relay used. The sensors are delivered with standard length electrodes - these are cut off to suit the application. GET A QUOTE

  • Quick view

    A compact and flexible level probe for measuring the level of conductive liquids, i.e overfill, dry run protection or pump control. A total measurements system consist of a multiple probehead, 1-5 electrodes and a control unit. The electrode length can be freely defined be means of electrode extention units - with or without isolation. GET A QUOTE

  • Quick view

    Level sensor for measuring the level of conductive liquids, i.e. max./min. control of charging for discharging. The function is determined by the amplifier relay used. The sensors are delivered with standard length electrodes - these are cut off to suit the application. The teflon housing makes the sensor excellent for use in rough environments. GET A QUOTE

  • Quick view

    µ-Processor based level controller for liquids with a wide sensitivity range (like sewage water, chemicals, salt water etc.). Max./min. control of charging/ discharging. The sensitivity is adjustable by means of the potentiometer and the rotary switch. 2 x 8A DPDT relay output. GET A QUOTE

Showing 1 - 12 of 17 items