View larger
Smart Dupline Power Dimmer up to 500W with Energy Reading
This 500W universal dimmer is designed for DIN-rail mounting with energy measurement. Single phase variables: Vln, A, W. Energy measurement: total kWh consumed by the connected load. This universal dimmer is suitable for dimming resistive, inductive and capacitive loads and LED lamps.
The maximum load of R, L, C type is 500W depending on the temperature: the reduction is described according to the trend in the diagram “derating curve”.
The dimmer automatically detects if the connected load is resistive, capacitive or inductive, but if a LED lamp is to be driven, the user has to select the right curve as described below.
The dimmer is completely programmable via the UWP 3.0 tool.
The technology used enables to electrically protect the dimmer against short circuit, overload and over-temperature. Thanks to the internal bus, it can be easily connected to adjacent dimmers (see “wiring diagram”) without the need of cabling the Dupline® BUS.
Futhermore, the integrated sink allows you to mount the dimmers adjacently without any reduction of the load due to the increased temperature.
Features
• Universal dimmer up to 500W for R, L, C load and LED lamps
• Automatic load detection for R, L, C loads
• Integrated heat sink for temperature dissipation
• 1 dimmable output
• Soft start/stop
• Protected against short circuit, overload and high temperature
• Minimum load 3 W
• Instantaneous variables readout: current, voltage, power
• Energy measurement: kWh
• Faulty lamp recognition
