Features

• Built-in lens: 2°, 5° or 8°

• Range: 20 m

• Modulated infrared light

• High immunity to ambient light • For amplifier series S142. and S143.

• Degree of protection IP 66/IP 67

• ATEX II 3 DX T50°C • High penetration power

• 15 m shielded PVC cable

• Ø 10 mm polycarbonate housing or M12 or M14 stainless steel

The post MOFR ATEX Approved Sensors for Amplifier appeared first on SCL System.

The sensor is made in a strong aluminium housing with 8 mm plug for fast disconnection.

Features

• Slot width of 3 mm

• Settings: Standard and fine mode

• Teach-In: Push button or by wire

• Universal output: NPN, PNP, NO or NC

• Teach-In lock

• High speed of detection

• Detection of transparent material

The post Photoelectric Fork Sensor appeared first on SCL System.

• Inner fiber diameter ∅0.25, 0.5 or 1.0 mm

• Outer fiber diameter ∅2.2, 1.25 mm

• Bending radius 10, 15 or 25 mm

• For use with fiber optic sensor amplifier FA series

• Overmoulding protection for better curvature and protection from breakage of fiber

• High tensile strength of 8 kg ensuring reliability and durability

• 2000 mm fiber length

The post Fibre Optics (Plastic) appeared first on SCL System.

FA1 has a 2 x 4 digits LED display to show the signal level and threshold respectively. Display direction can be inverted to suit different installation needs. FA1 is also equipped with a 3-ways adjuster switch to adjust sensitivity and different response time.

The sensor output is either NPN or PNP and is selectable to be light on or dark on. There is also a timer for the output which can be selected to be on delay, off delay, on one shot and off one shot to suit most applications’ needs.

Features

• Distance range is fiber dependent. Please see the FUR, FUT datasheet

• Easy set-up using 3-ways adjustment switch

• 2 X 4 digits display to show signal level and threshold

• Display direction can be inverted to suit different mounting

• Output 100mA NPN or PNP • Light on and dark on switching selectable

• Operational voltage 12 to 24 VDC

• On, off, on one shot, off one shot delay timer

• Response time 200, 500, 1000, 5000µS

The post Fibre Optic Sensor appeared first on SCL System.

YL212CPN8M1IO is machine mount fieldbus module with eight M12 IO-Link ports, compatible with IO-Link V1.0 and V1.1. It is a gateway solution with support for PROFINET IO fieldbus system.

Thanks to a powerful web interface and integrated IODD interpreter it is possible to configure and diagnose the IO-Link master even from a tablet or smartphone and easily read, parameterize or configure the IO-Link devices connected.

Thanks to IO-Link V 1.1 it is possible to replace a connected device by downloading all parameters into a replacement device automatically from the Master.

With Y series IO-Link masters it is possible to simultaneously provide data access via different communication protocols like PROFINET IO, Modbus/TCP and OPC UA to multiple controllers.

Benefits

• Eight M12 IO-Link ports to PROFINET IO which allows up to eight sensor or actuator connections on a single master

• Additional digital input on every port

• M12 L-Coded power connectors

• Robust IP67 slim-line housing design for machine mounting in harsh environments

• PROFINET IO and Modbus/TCP access to IO-Link process, event and service data

• OPC UA support

• Integrated web server and IODD interpreter

• Dual Ethernet ports via M12, D-coded

• Multi-colour LEDs for device, network, and port status diagnostics

• Wide operating temperature: -25° to +60°C (-13° to 140°F)

• IO-Link V1.0 and V1.1 compatibility

• IO-Link COM1, COM2 and COM3 (230K baud rate)

Features

• Embedded web server and IODD interpreter to configure and access diagnostic information of the attached IOLink devices and of the fieldbus module itself (e.g. setting the IP address and subnet mask) without the need of a specific software

• Possibility to store the configuration of all devices connected in the IO-Link master memory to allow the system to work even without a higher-level PLC and to enable error-proof sensor replacement with automatic parameterization

• IIoT ready, thanks to the integrated OPC UA interface that allows reliable, continuous and transparent data transfer between the field level (sensor/actuator) and higher-level cloud systems in full compliance with the Industry 4.0 requirements

• Daisy-chain power supply with standardized L-coded M12 connection technology allows a higher current rating of up to 16 A

• Industrial Ethernet components and a fully incapsulated housing for harsh environment applications

• Multi-colour LEDs with status and diagnostics information for each channel

The post Slim-Line IO-Link Master with PROFINET IO, Mobus/TCP appeared first on SCL System.

YL212CEI8M1IO is machine mount fieldbus module with eight M12 IO-Link ports, compatible with IO-Link V1.0 and V1.1. It is a gateway solution with support for EtherNet/IP™ fieldbus system.

Thanks to a powerful web interface and integrated IODD interpreter it is possible to configure and diagnose the IO-Link master even from a tablet or smartphone and easily read, parameterize or configure the IO-Link devices connected.

Thanks to IO-Link V 1.1 it is possible to replace a connected device by downloading all parameters into a replacement device automatically from the Master.

With Y series IO-Link masters it is possible to simultaneously provide data access via different communication protocols like EtherNet/IP™, Modbus/TCP and OPC UA to multiple controllers.

Benefits

• Eight M12 IO-Link ports to EtherNet/IP™ which allows up to eight sensor or actuator connections on a single master

• Additional digital input on every port

• M12 L-Coded power connectors

• Robust IP67 slim-line housing design for machine mounting in harsh environments

• EtherNet/IP™ and Modbus/TCP access to IO-Link process, event and service data

• OPC UA support

• Integrated web server and IODD interpreter

• Dual Ethernet ports via M12, D-coded

• Multi-colour LEDs for device, network, and port status diagnostics

• Wide operating temperature: -25° to +60°C (-13° to 140°F)

• IO-Link V1.0 and V1.1 compatibility

• IO-Link COM1, COM2 and COM3 (230K baud rate)

Features

• Embedded web server and IODD interpreter to configure and access diagnostic information of the attached IOLink devices and of the fieldbus module itself (e.g. setting the IP address and subnet mask) without the need of a specific software

• Possibility to store the configuration of all devices connected in the IO-Link master memory to allow the system to work even without a higher-level PLC and to enable error-proof sensor replacement with automatic parameterization

• IIoT ready, thanks to the integrated OPC UA interface that allows reliable, continuous and transparent data transfer between the field level (sensor/actuator) and higher-level cloud systems in full compliance with the Industry 4.0 requirements

• Daisy-chain power supply with standardized L-coded M12 connection technology allows a higher current rating of up to 16 A

• Industrial Ethernet components and a fully incapsulated housing for harsh environment applications

• Multi-colour LEDs with status and diagnostics information for each channel

The post Slim-Line IO-Link Master with EtherNet/IP™, Mobus TCP appeared first on SCL System.

Y series of IO-Link masters fully satisfy the most demanding industrial communication needs.

YN115CPN8RPIO is DIN rail mount fieldbus module with eight IO-Link ports, compatible with IO-Link V1.0 and V1.1. It is a gateway solution with support for PROFINET IO fieldbus system.

Thanks to a powerful web interface and integrated IODD interpreter it is possible to configure and diagnose the IO-Link master even from a tablet or smartphone and easily read, parameterize or configure the IO-Link devices connected.

Thanks to IO-Link V 1.1 it is possible to replace a connected device by downloading all parameters into a replacement device automatically from the Master.

With Y series IO-Link masters it is possible to simultaneously provide data access via different communication protocols like PROFINET IO, Modbus/TCP and OPC UA to multiple controllers.

Benefits

• Eight port IO-Link Master to PROFINET IO which allows up to eight sensor or actuator connections on a single master

• Additional digital input on every port

• Pluggable/removable push-in and screw terminal connectors for IO-Link and Power

• IP20 DIN rail mount enclosure

• PROFINET IO and Modbus/TCP access to IO-Link process, event and service data

• OPC UA support

• Integrated web server and IODD interpreter

• Dual Ethernet ports via RJ45

• Multi-colour LEDs for device, network, and port status diagnostics

• Wide operating temperature range: -40° to +70°C (-40° to +158°F)

• IO-Link V1.0 and V1.1 compatibility

• IO-Link COM1, COM2 and COM3 (230K baud rate)

Features

• Embedded web server and IODD interpreter to configure and access diagnostic information of the attached IOLink devices and of the fieldbus module itself (e.g. setting the IP address and subnet mask) without the need of a specific software

• Possibility to store the configuration of all devices connected in the IO-Link master memory to allow the system to work even without a higher-level PLC and to enable error-proof sensor replacement with automatic parameterization

• IIoT ready, thanks to the integrated OPC UA interface that allows reliable, continuous and transparent data transfer between the field level (sensor/actuator) and higher-level cloud systems in full compliance with the Industry 4.0 requirements

• Quick and easy installation on a standard DIN rail

• Pluggable/removable connectors, supplied together with the IO-Link Master, allow high flexibility and time saving in any installation

• Industrial grade components and redundant power inputs make Y series IO-Link masters exceptionally reliable for critical applications

• Multi-colour LEDs with status and diagnostics information for each channel

The post DIN Rail IO-Link Master with PROFINET IO, Mobus/TCP appeared first on SCL System.

YN115CEI8RPIO is DIN rail mount fieldbus module with eight IO-Link ports, compatible with IO-Link V1.0 and V1.1. It is a gateway solution with support for EtherNet/IP™ fieldbus system.

Thanks to a powerful web interface and integrated IODD interpreter it is possible to configure and diagnose the IO-Link master even from a tablet or smartphone and easily read, parameterize or configure the IO-Link devices connected.

Thanks to IO-Link V 1.1 it is possible to replace a connected device by downloading all parameters into a replacement device automatically from the Master.

With Y series IO-Link masters it is possible to simultaneously provide data access via different communication protocols like EtherNet/IP™, Modbus/TCP and OPC UA to multiple controllers.

Benefits

• Eight port IO-Link Master to EtherNet/IP™ which allows up to eight sensor or actuator connections on a single master

• Additional digital input on every port

• Pluggable/removable push-in and screw terminal connectors for IO-Link and Power

• IP20 DIN rail mount enclosure

• EtherNet/IP™ and Modbus/TCP access to IO-Link process, event and service data

• OPC UA support

• Integrated web server and IODD interpreter

• Dual Ethernet ports via RJ45

• Multi-colour LEDs for device, network, and port status diagnostics

• Wide operating temperature range: -40° to +70°C (-40° to +158°F)

• IO-Link V1.0 and V1.1 compatibility

• IO-Link COM1, COM2 and COM3 (230K baud rate)

Features

• Embedded web server and IODD interpreter to configure and access diagnostic information of the attached IOLink devices and of the fieldbus module itself (e.g. setting the IP address and subnet mask) without the need of a specific software

• Possibility to store the configuration of all devices connected in the IO-Link master memory to allow the system to work even without a higher-level PLC and to enable error-proof sensor replacement with automatic parameterization

• IIoT ready, thanks to the integrated OPC UA interface that allows reliable, continuous and transparent data transfer between the field level (sensor/actuator) and higher-level cloud systems in full compliance with the Industry 4.0 requirements

• Quick and easy installation on a standard DIN rail

• Pluggable/removable connectors, supplied together with the IO-Link Master, allow high flexibility and time saving in any installation

• Industrial grade components and redundant power inputs make Y series IO-Link masters exceptionally reliable for critical applications

• Multi-colour LEDs with status and diagnostics information for each channel

The post DIN Rail IO-Link Master with EtherNet/IP™, Mobus/TCP appeared first on SCL System.

For connection se the wiring diagram on the sensor tester. To replace the batteries (2x9V, e.g. PP3) or fuse (100mA f) remove the screw on the backside of the sensor tester.

Features

• NAMUR (EN 50 227)

• 2-wire DC

• 3-wire DC

• 4-wire DC

The post ST-03 Sensor Tester appeared first on SCL System.

• High quality reflectors for retro-reflective photoelectric switches

• Reflective tape suitable for polarized light

• Heated reflectors for cold storage or freezer installations

• All catalogued photoelectrics use ER 4 as reference for applicable sensing distance

Type Selection

Reflective tape

25 mm wide x 45.7 meters long (1 roll): ERT 25

Reduction factors on distance: 0.23 (25 x25 mm)

50 mm wide x 45.7 meters long (1 roll): ERT 50

Reduction factors on distance: 0.34 (50 x 50 mm)

The post ER Reflectors appeared first on SCL System.