View larger
GS 7510 2101 Safety Input Module
Bus-powered safety input module approved according to IEC/EN 61508-SIL3, IEC/EN 62061-SIL3 and ISO/EN 13849-1 PL e by TÜV. The module has a single input for potential-free contacts, and it uses two Dupline® channels for sending the safety signal.
The small dimension IP67 housing makes it suitable for de-central installation, e.g. inside a pull-cord switch. The module is always used in conjunction with the DuplineSafe Safety Relay GS 38300143230. The “safe state” signal is transmitted continuously to the Safety Relay as long as the input contacts are closed and the module self-check is OK.
Features
• Bus-powered input module
• Single input for potential-free contacts
• Small dimension IP67 housing for de-central installation at the actual location of the switch
• Safety approved according to IEC/EN 61508-SIL3, IEC/ EN 62061-SIL3 and ISO/EN 13849-1 PL e
• Approval authority: TÜV Rheinland Group
• Uses two Dupline® channels
• Operates on a standard Dupline® network
• It is possible to use DuplineSafe modules and standard Dupline® modules on the same bus
• Address coding with GS73800080
• Typically used for emergency stops or other NC safety contacts
