Manufacturers


Notice: Undefined index: debug in /home/sclsystem/public_html/cache/smarty/compile/fc/b6/55/fcb6553ca490786cc4cad67dd2cf5ad53a945277.file.category.tpl.php on line 39

Monitoring Relays There are 78 products.

per page
Showing 25 - 36 of 78 items
  • Small size current monitoring relay with built-in current transformer and integrated solid state output. Self-powered from the input current with 2-wire connection for easy setup. 12 mm hole for insulated current wire to easily insert the metered cable (multiple times if needed). For mounting on DIN-rail or back panel. GET A QUOTE

  • 3-phase current metering relay with separate setting of upper and lower current level. For DIN-rail mounting. Often used where a certain application such as a large mixer has to be kept within a set current value in order not to overload the system.  GET A QUOTE

  • DIA01 and PIA01 are precise AC/DC over current monitoring relays. Direct measuring or through current transformer. Owing to the built-in latch function, the ON-position of the relay output can be maintained. The red LED indicates the relay status. Through the built-in shunt it is possible to monitor loads up to 5 A AC/DC. GET A QUOTE

  • DIB01 and PIB01 are precise TRMS AC/DC over or under current (selectable by DIPswitch) monitoring relays. Direct measuring or through current transformer. Owing to the built-in latch function, the ON-position of the relay output can be maintained. Inhibit function can be used to avoid relay operation when not desired (maintenance, transitions). The...

  • DIC01 and PIC01 are precise TRMS AC/DC over+under, over+over or under+under current and voltage (selectable by DIPswitch) monitoring relays. DIC01 can perform also DC plus/minus measurement by short circuiting pins Z3 and Y1. The devices can be connected to the MI or MP and A82 or E83 current transformers. Both relays have two individual set levels with...

  • 3-phase relay for detection of incorrect phase sequence, total and partial phase loss. Supply range from 208 to 690 VAC covered by two multivoltage relays. For mounting on DIN-rail or plug-in module. The device detects regenerated voltages up to 85% of the nominal voltage (phase-phase). GET A QUOTE

  • 3-phase relay for detection of incorrect phase sequence. Supply range from 208 to 240 and 380 to 415 VAC covered by two multi voltage relays. For mounting on DIN-rail or Plug-in module. GET A QUOTE

  • 3-Phase relay for detection of incorrect phase sequence and phase loss. Using the front knob it can be decided the undervoltage setpoint of the unit. Supply range from 208 to 240 VAC, 380 to 480 and 600 to 690 VAC covered by three multivoltage relays. For mounting on DIN-rail or plug-in module. GET A QUOTE

  • DPA51 is a 3-phase mains monitoring relay. It operates on 3P systems, monitoring phase loss and phase sequence. Power supply provided by the monitored mains. For mounting on DIN-rail. GET A QUOTE

  • DPA52 is a 3-phase mains monitoring relay. It operates on 3P systems, monitoring phase loss and phase sequence. Power supply provided by the monitored mains. For mounting on DIN-rail. GET A QUOTE

  • 3-Phase relay for detection of incorrect phase sequence and phase loss. Using the front knob it can be decided the undervoltage setpoint of the unit. Supply range from 208 to 240 VAC and 380 to 480 VAC covered by two multivoltage relays. For mounting on DIN-rail. Housing 17.5 mm wide suitable both for back and front panel mounting. GET A QUOTE

  • 3-Phase relay for detection of incorrect mains voltage. Also detecting incorrect phase sequence and phase loss. This unit allows to stop incorrect power supply voltage when different from the desired one.Power supply range from 208 to 480 VAC plus selection of the different possible nominal voltages. For mounting on DIN-rail. Housing 17.5 mm wide...

Showing 25 - 36 of 78 items