> Products>Carlo Gavazzi>Sensors>Magnetic Sensors

Manufacturers


Notice: Undefined index: debug in /home/sclsystem/public_html/cache/smarty/compile/fc/b6/55/fcb6553ca490786cc4cad67dd2cf5ad53a945277.file.category.tpl.php on line 39

Magnetic Sensors There are 32 products.

per page
Showing 13 - 24 of 32 items
  • Quick view

    The ILU and ILMPU models, for horizontal mounting, are also made in non-toxic polypropylene. The ILMPU model, extremely small dimensioned, can be used both as a NO function and NC function depending on mounting direction. The ILMU models, also for horizontal mounting, is made in plastic material. GET A QUOTE

  • Quick view

    The ILSP models, made of non toxic polypropylene with silicone cable output function, allow the change of the output function by turning the float or the rod. GET A QUOTE

  • Quick view

    The magnetic sensors M and MS series use miniaturized reed contacts. The output function can be NO (Normally Open), NC (Normally Closed) or CO (Change-over). The sensor MSA1 has the peculiarity to detect the cut of the cable; it can be used to control entries. The magnetic units are to be ordered separately except for MSA1 (supplied together with CL2)....

  • Quick view

    The micro-miniature types are characterized by extremely small dimensions. The MM.A.6 model contains, in a very small case, a very high sensibility contact, with low hysteresis. The two fixing holes, suited for M3 screws, allow simple mounting procedure over a large variety of applications. GET A QUOTE

  • Quick view

    The SP.A.1.. magnetic sensors allow to use two different normally closed contacts: the first one has low power (5VA) and can be used as a signal contact; the second one has high power (100VA) and can be used to drive hard loads. The cable output (ended by a connector) may be 3x0.75 mm2, with the ground connection fixed on the case of the sensors by a thin...

  • Quick view

    The SP.B.2 and SP.B.2/2MT models are shielded laterally in order to reduce magnetic interferences when mounted side by side with other sensors. The fixing by means of two nuts and washers, delivered with the sensor, give good reliability and greatly semplify the mounting procedure. GET A QUOTE

  • Quick view

    The standard proximity magnetic sensor series is characterized by a plastic rectangular case; the sensor switching is side type. Several operating distances may be obtained thanks to the wide range of magnetic units available. Two holes provided in the body allow an easy and fast mounting.  GET A QUOTE

  • Quick view

    The coded magnet series includes multiple flux rectangular and cylindrical magnets to be used together with SMS Safety magnetic sensors. Also metallic case is available (CLSA2M). GET A QUOTE

  • Quick view

    The coded magnet series includes multiple flux rectangular and cylindrical magnets to be used together with SMS Safety magnetic sensors. Also metallic case is available (CLSA2M). GET A QUOTE

  • Quick view

    The SMSA2P02 series is designed in conformity with EN 292-1, EN 292-2, EN 60204-1, EN 954-1 and EN 1088. It is characterised by multiple flux coding and is suited for applications up to safety Category 4. GET A QUOTE

  • Quick view

    The SMSA2P10 is designed EN ISO 12100:2010, EN 60204-1 and EN 1088. It is characterized by multiple flux coding and is suited for applications up safety Category 3 in accordance with EN ISO13849-1:2015 when connected to appropriate safety devices. GET A QUOTE

  • Quick view

    The SMSAXP30 series is designed in conformity with EN ISO 12100:2010, EN 60204-1 and EN 1088. It is characterised by multiple flux coding and is suited for applications up to safety Category 3, in accordance with EN ISO13849-1:2015 when connected to appropriate safety devices. GET A QUOTE

Showing 13 - 24 of 32 items